ALLOY BARREL

• 1' 48mm barrel
• 2' 48mm barrel
• 3' 48mm barrel
• 4' 48mm barrel
• 5' 48mm barrel
• 6' 48mm barrel
• 7' 48mm barrel
• 8' 48mm barrel
• 10'48mm barrel
• 12' 48mm barrel
• 14' 48mm barrel
• 16' 48mm barrel
• 20' 48mm barrel
• 5M 48mm barrel

INTERNALLY WIRED BARS

• 4' 15a internally wired bar - black
• 7'6" 15a internally wired bar - black
• 7'6" 15a internally wired bar - chrome

48mm BARREL FITTINGS

• 48mm alliscaff half coupler - eyenut
• 48mm alliscaff double coupler
• 48mm alliscaff swivel fitting
• 48mm mild steel double coupler
• 48mm mild steel swivel fitting
• 48mm mild steel putlog coupler
• 48mm mild steel joint pin
• External joint sleeve for 48mm barrel
• 48mm girder clamp (use in pairs)

STEEL WIRE ROPES

• 432kg 3m x 6mm eye-eye steel wire rope
• 1.2T 500mm x 10mm eye-eye steel wire rope
• 1.2T 1m x 10mm eye-eye steel wire rope
• 1.2T 2m x 10mm eye-eye steel wire rope
• 1.2T 3m x 10mm eye-eye steel wire rope
• 1T 6m x 10mm eye-eye steel wire rope
• 1T 8m x 10mm eye-eye steel wire rope
• 1.2T 3m x 10mm eye-eye PVC covered SWR
• 1.8T 5m x 12mm eye-eye steel wire rope
• 1T 10' eye-eye steel wire rope
• 1T 30' eye-eye steel wire rope
• PVC covered SWR to suit Slick truss
• PVC covered SWR to suit H30V Prolyte truss
• 2m EWL truss wrap to suit H40V - SWL 1000kg
• 4m x 4mm SWR - hard eye > open (SWL 432kg)
• 1T 8' hook-hook steel wire rope

SHACKLES AND RIGGING ACCESSORIES

• 1T 'D' shackle - small
• 1.5T bow shackle - small
• 1.25T bow shackle - large (2 types)
• 3.25T Crosby bow shackle

SPANSETS

• 1T 0.5m EWL spanset
• 1T 1m EWL spanset
• 2T 1.5m EWL spanset
• 1T 2m EWL spanset
• 1T 3m EWL spanset

HOISTS AND MOTORS

• 1T SWL 9m drop manual chain hoist
  
  Supplied: chain bag.
• 136kg 12m Prostar chain hoist
  
  Supplied: chain bag. Connector: 16A 240V 3-pin - male (power), 16A 110V 4-pin - female (control).
• 500kg 20m Lodestar chain hoist
  
  Supplied: chain bag. Connector: 16A 240V 3-pin - male (power), 16A 110V 4-pin - female (control).
• 1000kg 25m Lodestar chain hoist
  
  Supplied: chain bag. Connector: 16A 415V 4-pin - male (power), 16A 110V 4-pin - female (control).
• Weather protection bag for 1000kg Lodestar motors

MOTOR CONTROL

• Prostar/Lodestar pickle
• 12-way single-phase motor controller
  
  12-way motor controller for single-phase motors (or three-phase motors with the addition of a three-phase interface, below). Keyswitch lockout, e-stop and

  pickle enable controls. Two units can be slaved for up to 24 ways of synchronised control.
  
  Supplied: remote handset, 15m ceep remote cable.
  
  Connector: 32A TPNE inlet, 3x Socapex (1 per 4 motors) out, ceep remote connection, XLR6 link port.

• 4-way, three-phase interface for motor controller
  
  Allows control of 4no. three-phase motors from a Tower 12-way controller.
  
  Connector: 32A TPNE inlet and loop out, 1x Socapex control input, 4x 16A 415V 4-pin and 4x 16A 110V 4-pin to motors.
• 4-way motor break-out box for 12-way motor controller
  
  For use with a Tower 12-way motor controller ONLY.
  
  Supplied: 48mm half coupler, safety bond.
  
  Connector: Socapex inlet, 4x 16A 240V 3-pin and 4x 16A 110V 4-pin to motors.
• 12-way motor controller remote handset
• 15m remote handset extension

MOTOR LOOMS

• 2m single-phase motor
• 5m single-phase motor loom
• 10m single-phase motor loom
• 15m single-phase motor loom
• 20m single-phase motor loom
• 25m single-phase motor loom
  
  All single-phase looms are constructed from H07 rubber cable and fitted with 16A 240V 3-pin power connectors and 16A 110V 4-pin control connectors.
  
  
• 5m three-phase motor loom
• 10m three-phase motor loom
• 15m three-phase motor loom
• 20m three-phase motor loom
• 25m three-phase motor loom
• 30m three-phase motor loom
  
  All three-phase looms are constructed from H07 rubber cable and fitted with 16A 415V 4-pin power connectors and 16A 110V 4-pin control

  connectors.

STANDS

• Manfrotto wind-up stand c/w Big Ben
• Manfrotto 6m 180kg wind-up stand
• 2.1m > 3.7m autopole
• 2' x 2' boom base to suit 48mm barrel
• Off-set boom base to suit 48mm barrel
• Tank trap to suit 48mm barrel
• Heavy steel base - small
• Heavy steel base

CLAMPS AND STRAPS

• Manfrotto 15kg superclamp + M10 male thread spigot
• M10 TV Spigot
• Mobiltech pole clamp
• 'Big Ben' coupler - spigot
• 6" C Clamp
• Keder clamp - type 'A'
• 230kg rated Keder clamp - M10 eye bolt
• 1.75T 75-230mm beam clamp
• Kee clamp - various shapes
• 25mm x 3m endless ratchet strap - black webbing
• 25mm x 5m endless ratchet strap - black webbing
• RAT/5L 50mm x 5m endless ratchet strap - blue webbing
• 5m 5000kg truck ratchet strap

MISCELLANEOUS

• Master link O-ring - SWL 2000kg
• 6" C clamp
• 2' 48mm 'C' clamp
• 1m EWL safety chain clutch - SWL 1000kg
• 2m EWL chain clutch - SWL 1500kg
• 2-leg mini lift adjustable bridle
• 6mm SWR bullet
• 20mm 1T eye-eye bottle screw
• 2-leg fixed bridle karabiner > masterlink

LECTERNS

• Wooden lectern c/w: paper tray
• Truss lectern c/w: perspex top

SLICK LITEBEAM - 300mm TRIANGULAR TRUSS

• 0.25m section Slick Litebeam
• 0.5m section Slick Litebeam
• 1m section Slick Litebeam
• 1.5m section Slick Litebeam
• 1.5m section Slick Litebeam (white)
• 2m section Slick Litebeam
• 2m section Slick Litebeam (black)
• 2.5m section Slick Litebeam
• 2.5m section Slick Litebeam (black)
• 3m section Slick Litebeam
• 3m section Slick Litebeam (white)
• 3m section Slick Litebeam (black)
• Slick litebeam 90 degree horizontal corner
• Slick litebeam 90 degree three way corner
• Slick litebeam 90 degree goalpost corner
• Slick litebeam horizontal tee corner
• Slick litebeam swivel hinge - horizontal
• Set/3 slick litebeam 104mm spacers
• Slick base plate - male
• Slick base plate - female
• Slick litebeam tower plate c/w 4no. 'U' bolts

PROLYTE H30D - 300mm TRIANGULAR TRUSS

• 0.25m section Prolyte H30D
• 0.5m section Prolyte H30D
• 1m section Prolyte H30D
• 2m section Prolyte H30D
• 3m section Prolyte H30D
• 4m section Prolyte H30D
• Base plate for Prolyte H30D
• Prolyte H30D box corner - main block
• Prolyte H30D box corner - horizontal long section
• Prolyte H30D box corner - vertical long section
• Prolyte H30D box corner - horizontal short section
• Prolyte H30D box corner - vertical short section

PROLYTE H30V - 300mm BOX TRUSS

• 0.25m section Prolyte H30V
• 0.5m section Prolyte H30V
• 1m section Prolyte H30V
• 2m section Prolyte H30V
• 3m section Prolyte H30V
• 4m section Prolyte H30V
• Base plate for Prolyte H30V
• Prolyte H30V box corner c/w attachments

PROLYTE H40V - 400mm BOX TRUSS

• 0.5m section Prolyte H40V
• 1m section Prolyte H40V
• 2m section Prolyte H40V
• 3m section Prolyte H40V
• 4m section Prolyte H40V
• Base plate for Prolyte H40V
• Prolyte H40V box corner c/w 3no. set/4 couplers

PROLYTE S52V BOX TRUSS

• 2m section Prolyte S52V
• 3m section Prolyte S52V

PROLYTE MPT

• Prolyte MPT-010 self climbing tower set c/w 0.5m section H30V
• Short outriggers for Prolyte MPT tower
• Long outriggers for Prolyte MPT tower

TRUSS ACCESSORIES

• 30' SWR truss ladder
• Copper/hide truss hammer

ACCESS

• Small steps
• 8 rung Zargees
• 12 rung Zargees
• 14 rung Zargees
• Platform alloy access tower

MISCELLANEOUS

• Stage weight